| Author |
 Topic  |
|
|
DougieDoug
New Member
United Kingdom
10 Posts |
 Posted - 12/03/2008 : 21:03:32
|
| i read a post on here a little while ago, sum1 had r6 calipers on thr zxr, just wondered if they go straight on or do u need to change the discs or nefing? cheers doug |
Have a break, Have a kwik kwak |
|
|
Jake strange
Familiar Member
United Kingdom
282 Posts |
Posted - 12/03/2008 : 23:11:19
|
nah, they wont go straight on. you need to get a plate made up to mount them.
k1 gsxr ones and some fireblade ones bolt on with a bit of fiddlin
|
Edited by - Jake strange on 12/03/2008 23:13:04 |
 |
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
Posted - 13/03/2008 : 20:32:17
|
Yeah i put some gsxr600 k1 calipers on, you just need to drill and tap the caliper so a 10mm bolt will go through, will also need a 2mm spacer to stick to caliper b4 mounting. Have a good un jake at anglesey.  |
zxr400,spruced up engine, quickshifter, full swona system and a few bits and bats |
|
|
|
Jake strange
Familiar Member
United Kingdom
282 Posts |
Posted - 13/03/2008 : 22:55:03
|
its not lookin good for me either wayne, ive been totaly let down by the guy who was sposed to be building my engine....4 months he's had it, i found out today he has'nt even started it..gutted, ive used this bike shop for years..he's a racer himself.not good.
on a brighter note, chris at dynopro racing in runcorn sorted me spare engine out in a matter of days,good place if ya need any stuff doin/dyno runs. anyhow, so that went in the bike half hour ago, just gota try and get the rest sorted tommorow night..
i dont wanna just turn up on sunday and race, havent ridden the bike since last october, so could do with the satday practice.
i got a newer L model zxr tho!.. got it well cheap. 150 quid!
gonna race my old one for the start of this year whilst i (hopefully!) improve a bit
good luck to Oly this weekend at thundersporty! |
Edited by - Jake strange on 14/03/2008 10:14:31 |
|
|
| |
Topic |
|
front calipers
Forum Locked
