| Author |
 Topic  |
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
|
|
mruehl34
Regular Member
Germany
521 Posts |
 Posted - 12/09/2007 : 15:22:33
|
a pic pls. wheel
Michael |
 |
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
Posted - 12/09/2007 : 15:37:14
|
| there is a picture of wheel in vfr general discussion page 2 |
zxr400,spruced up engine, quickshifter, full swona system and a few bits and bats |
|
|
|
CMSMJ1
Forum Veteran
United Kingdom
3623 Posts |
Posted - 12/09/2007 : 16:21:40
|
| pics of the back of it where it mounts might be handy matey |
89 NC30 my mate Number 9
IMPERATOR REX ANGLORUM |
|
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
Posted - 12/09/2007 : 16:25:20
|
| I dont have a camera to do so , my girlfriend has taken it on holiday with her! on the other side of the wheel it just has 12 holes and the big hole in the middle? |
zxr400,spruced up engine, quickshifter, full swona system and a few bits and bats |
|
|
|
CMSMJ1
Forum Veteran
United Kingdom
3623 Posts |
Posted - 12/09/2007 : 16:43:11
|
so you reckon the 4 drive pins will locate in some of those 12?
cool wheel... |
89 NC30 my mate Number 9
IMPERATOR REX ANGLORUM |
|
|
|
mruehl34
Regular Member
Germany
521 Posts |
Posted - 12/09/2007 : 16:44:03
|
The dymag wheel has a big cone ( i donīt know if itīs right word) on the front side.
You must have an adapter.
Rear site i donīt know, missing pic.
Michael |
|
|
|
mruehl34
Regular Member
Germany
521 Posts |
Posted - 12/09/2007 : 16:45:00
|
This wheel come from a ducati?
Michael |
|
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
Posted - 12/09/2007 : 16:48:51
|
| The bloke i bought it from used it on his nc35, but i was in a hurry when i bought it and forgot to ask. i am hoping it will just bolt on as he never said any thing to me.I am pretty sure its the same sort of wheel alastair bayley uses on his rvf but not 100% |
zxr400,spruced up engine, quickshifter, full swona system and a few bits and bats |
|
|
|
shady83
Familiar Member
United Kingdom
280 Posts |
Posted - 12/09/2007 : 20:21:53
|
I have just managed to speak to the bloke and he has assured me it fits straight onto the original spindel and spindel bolt, and it does not need any adaptors, so i will put it on the bike on sat and show a few pics of the bike, in stripped form |
zxr400,spruced up engine, quickshifter, full swona system and a few bits and bats |
|
|
|
grandpanot
Senior Member
USA
1143 Posts |
Posted - 12/09/2007 : 22:40:37
|
| I got a 5 spoke that bolted directly on the NC30 but I do not know if it was built specifically for the NBC30 and therefore had the adaptor fitted when I received it. |
Hello, my name is Jeff and I am a Trackaholic.(EVANSTON, Illinois) |
|
|
| |
Topic |
|
dymag wheel
Forum Locked
