| Author |
 Topic  |
|
foxy
Settled In Member
United Kingdom
172 Posts |
 Posted - 17/10/2005 : 19:02:43
|
| superfour great job on exhaust any chance you can post material,dimensions,method ect cheers (is the flat piece welded from the outside cant see the weld?) |
never ride faster than your guardian angel can fly!! |
 |
|
|
superfour
Familiar Member
United Kingdom
212 Posts |
Posted - 17/10/2005 : 21:04:36
|
| Foxy, the flat piece was welded from the outside but I filed and then polished to produce the chamfered edge, the material used is 316 s/s (a higher grade then 304 which does corrode) the end piece is some 50mm tube I had lying around about 50mm length, the flat piece was cut from some 3mm plate and then cleaned up on the lathe O/D is about 6mm less than the O/D of the exhaust, hole in the middle is slightly bigger than 50mm so I could angle the tube, which is why it was welded from the outside, this will be cleaned up to form a radius, then it was polished to remove discoluration from the welds. I'll check thoses dimensions when i visit the shed later and confirm. |
|
|
|
supa4
Senior Member
Australia
1224 Posts |
Posted - 18/10/2005 : 02:23:00
|
Nice job Superfour, tidy bit of welding and an ingenious solution!
Remember everyone, if your original exhaust is scratched on the end (perhaps the bike fell over on the right hand side) you can fill any deep gouges with weld and grind and polish them out (that's what I did) any place that does stainless welding should be able to do it for not much money. |
93 CB400 SF & 89 NC30 - http://photobucket.com/albums/v413/supa4 |
|
|
|
superfour
Familiar Member
United Kingdom
212 Posts |
Posted - 18/10/2005 : 10:29:30
|
Checked the dimensions and they are correct, however the material used is just what I 'aquired'  from work. You can use any size tube for the pipe bit, but don't use anything thinner than 3mm for the plate, it'll distort when welding.
Hmmm, very quiet on the SF forum at the minute. |
|
|
|
foxy
Settled In Member
United Kingdom
172 Posts |
Posted - 18/10/2005 : 17:18:49
|
| cheers superfour ill have to have a go at my own next week while im off work.if i can get it half as tidy as yours ill be a happy man |
never ride faster than your guardian angel can fly!! |
Edited by - foxy on 18/10/2005 17:19:29 |
|
|
|
superfour
Familiar Member
United Kingdom
212 Posts |
Posted - 18/10/2005 : 18:39:28
|
You get time off, alright for some, still it's handy having an empty factory to play with after hours  |
|
|
|
barney_cb400sf
New Member
United Kingdom
30 Posts |
Posted - 25/10/2005 : 14:31:56
|
Hi all. Nothing special, but heres my pride and joy with me posing on it, lol!
 |
|
|
|
superfour
Familiar Member
United Kingdom
212 Posts |
Posted - 25/10/2005 : 14:48:11
|
| You'll have to upload your pics to photobucket or something similar. |
|
|
|
barney_cb400sf
New Member
United Kingdom
30 Posts |
Posted - 25/10/2005 : 15:34:08
|
quote:
Originally posted by superfour
You'll have to upload your pics to photobucket or something similar.
Oh right, i guess they don't show? How do you go about uploading it to photobucket?
Cheers Barney. |
|
|
|
superfour
Familiar Member
United Kingdom
212 Posts |
Posted - 25/10/2005 : 15:39:03
|
| Go to photobucket.com register with them them follow the instructions to upload, it's dead easy, then copy and paste the img link, thats it. |
|
|
|
Dick Steele
Familiar Member
Philippines
215 Posts |
Posted - 27/10/2005 : 13:17:11
|
Peeps, another teeny update. New toy installed!!! The ONLY Hyper VTEC in the Philippines with a 6 Spoke, 5.5 Inch Rim. Painting to follow next weeks. After a few trips in the machine shop & some spacers here & there, & a week of waiting, here she is. BTW, they were taken while still at the shop before i took here home. Home you like em!!!
![]() 
![]() 
![]()  |
"Keep ridin to where the sun dont shine"
(+63917-452-9190) |
|
|
|
jim3553
Familiar Member
Philippines
398 Posts |
Posted - 27/10/2005 : 13:42:55
|
Hey Dick, good to see your baby's home already.
She looks really great. Get those mags powder-coated asap.
A great halloween gift to yourself. |
Honda Magna VF750C
|
|
|
|
supa4
Senior Member
Australia
1224 Posts |
Posted - 28/10/2005 : 02:06:14
|
| looks good with the 6 spokes. What bike are they from? CBR400? CBR600? |
93 CB400 SF & 89 NC30 - http://photobucket.com/albums/v413/supa4 |
Edited by - supa4 on 28/10/2005 02:06:40 |
|
|
|
Dick Steele
Familiar Member
Philippines
215 Posts |
Posted - 28/10/2005 : 04:35:45
|
| 93 CBR900RR. What do you think is a good color to paint it? My initial choice is a Copper color then have the lips polished. Inputs. Now im selling my front & rear 5 inch rear rim to recover my cost. Will fit ALL Super 4s including PB1s, Version S/R with minimal adjustments. Those who want to give their bike a PHAT ASS, heres the upgrade you need...YUMMY!!!! |
"Keep ridin to where the sun dont shine"
(+63917-452-9190) |
|
|
|
jim3553
Familiar Member
Philippines
398 Posts |
Posted - 29/10/2005 : 15:08:27
|
Almost finished pimping my ride....
Added a Voltmeter....
And a Vance & Hines SS2R endcan
Just waiting for my Buell windscreen then im done........for now
|
Honda Magna VF750C
|
|
|
|
Dick Steele
Familiar Member
Philippines
215 Posts |
Posted - 29/10/2005 : 16:51:45
|
| Need a pics of its ass.... |
"Keep ridin to where the sun dont shine"
(+63917-452-9190) |
|
|
|
Dick Steele
Familiar Member
Philippines
215 Posts |
Posted - 29/10/2005 : 16:53:28
|
Like this "ASS"....
![]()  |
"Keep ridin to where the sun dont shine"
(+63917-452-9190) |
|
|
|
skolsuper
Settled In Member
United Kingdom
85 Posts |
Posted - 29/10/2005 : 20:46:54
|
| That rear end looks phat. Nice |
|
|
|
Dick Steele
Familiar Member
Philippines
215 Posts |
Posted - 30/10/2005 : 00:54:59
|
| Just like my women, i like it on my bike too!!!! HAHAHAHAHAHAHAHAHAHAHAHAHA!!!! |
"Keep ridin to where the sun dont shine"
(+63917-452-9190) |
|
|
|
angel66
Settled In Member
United Kingdom
199 Posts |
Posted - 31/10/2005 : 17:16:59
|
Beautiful bikes guys!! superfour that exhaust mod is the dogs well done mate!!!
Does anybody know where I can get a nice grill cover for my rad at a reasonable cost, want to tidy it up a wee bit!!
Cheers for now......... |
My body is a temple, my mind is a bowl of jelly. |
|
|
|
Topic |
|
Super 4 & CB1 Owners Galleries...
Forum Locked
