just wondered if it had ever been done cus the place i doin bit of work for on the side have got a couple of low pressure turbos lying around just thought might be god fun to do
TAGGY(slow boy)'s TECHNICIAN !!! 3 OF 3 RACES STARTED AND FINISHED NOT BAD FOR 1st ATTEMPT
You need to lower the compression, use different carbs, pistons, exhaust, an inlet manifold and oil cooler. Hopefully the conrods and bearings will be ok Atfer that competely remap the ecu
Turn them into 2 little gas turbine engines and bolt them in the seat unit All you need to do is conect a pipe from the compressor outlet to the turbine inlet which you use as a combustion chamber. Into that pipe you need an injector and igniter. Then you just need an oil system for the bearings.
think taggy managed to get some ill give him a call and find out and get back to you how much you wanting for them cudnt hurt to have a spare set if can talk him in to it.
TAGGY(slow boy)'s TECHNICIAN !!! 3 OF 3 RACES STARTED AND FINISHED NOT BAD FOR 1st ATTEMPT