Buy 400GB merchandise and Products from The Shop  
  Todays Date Is: 3/29/2024 Contact Us | Home | Donations | About 400GB | Disclaimer|
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 ZXR400 & ZZR400 Owner
 General Discussion
 zxr400h1 valve clearance
 Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

reggie-kwaker
New Member

United Kingdom
1 Posts

Posted - 06/05/2007 :  13:06:13  Show Profile
hi guys i recently bought a zxr400 h1. sometimes when its hot it wont restart very easily. i think maybee the valve clearances may be out. does any body know the procedure fo checking them. i took off the signal generator cover and there are lots of timing marks, any idea which ones to use and where to line them up too??

Duane
Familiar Member

Australia
437 Posts

Posted - 06/05/2007 :  13:53:39  Show Profile
Usually closed up clearances are worse when the engine is cold making it hard to start then. Hot starting problems may be fuel related?

The older I get the Faster I was!
Go to Top of Page

noelb
New Member

Ireland
48 Posts

Posted - 08/05/2007 :  16:40:54  Show Profile
I was always under the impression that all ZXR400s were a pain to start when hot????

Noel B.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
400GreyBike.co.uk © 2006 400GreyBike - All Rights Reserved Go To Top Of Page
Snitz Forums 2000